How to Use Your Cleolight™ Mask
What's in the Box
- Cleolight™ LED Mask
- USB-C charging cable
- Eye guards
- Travel case (if included with your order)
First Use — Charge Before You Start
Your mask should be charged before first use. Plug in via USB-C with the power switch in the OFF position and wait until the indicator light turns green (1–2 hours). Then unplug.
Step-by-Step: Using the Mask
1. Start with clean, dry skin. Remove all makeup, sunscreen, and skincare products before use. The LEDs work best with direct skin contact and no barriers.
2. (Optional) Insert your eye guards. Line the eye guards up with the openings on the inside of the mask and press into place. You can also use your own eye protection.
3. Put on the mask and adjust the strap. Slide the strap adjuster to get a snug, comfortable fit. The mask should rest against your face without gaps.
4. Flip the power switch to ON. The switch is located on the top of the mask.
5. Tap the center of the forehead area with your full palm. Use your whole palm, not just fingertips. You should hear a sound — that's your confirmation it's powered on.
6. Select your light color. Tap the right side of the mask (as you're wearing it) to cycle through the 7 wavelengths. The mask also has an automatic cycle mode that rotates through all 7 colors.
7. Relax for 10–15 minutes. Sit back or lie down. The mask does the work.
8. Power off when done. Tap to turn the LEDs off, then flip the power switch to OFF. Always switch off after each use to preserve battery life.
Light Colors & What They Do
| Color | Wavelength | Benefit | |---|---|---| | 🔴 Red | 633nm | Anti-aging, collagen production, fine lines & wrinkles | | 🔵 Blue | 415nm | Antibacterial, acne treatment | | 🟢 Green | 525nm | Brightening, hyperpigmentation, oily skin | | 🩵 Cyan | 490nm | Calming, sensitivity reduction | | 🟡 Yellow | 590nm | Redness, rosacea, lymphatic support | | 🟣 Purple | Red + Blue | Combined anti-aging + acne | | ⚪ White | Full Spectrum | Overall skin rejuvenation |
How Often Should I Use It?
For best results, use your mask 3–5 times per week. Consistency over time is what drives results — most customers start noticing changes after 4–6 weeks of regular use.
Tips
- Always apply your moisturizer or serum after your session, not before, for maximum absorption
- The neck panel is designed to hang naturally below the face panel — no adjustment needed
- The slight "whirring" sound on some colors is completely normal
- If the mask lights start blinking or dimming mid-session, the battery is running low — finish your session and charge before the next use
Questions?
Email: queen@cleolight.com